One-IC two-tones Siren

Posted in Sound generator, on 2015-05-11

Circuit diagram:

One-IC two-tones Siren

Parts:

  • R1,R3___470K 1/4W Resistors
  • R2______680K 1/4W Resistor
  • R4_______82K 1/4W Resistor
  • R5______330K 1/4W Resistor
  • R6_______10K 1/4W Resistor
  • R7_______33K 1/4W Resistor
  • R8________3M3 1/4W Resistor
  • C1,C5_____10µF 25V Electrolytic Capacitors
  • C2,C6_____10nF 63V Polyester Capacitors
  • C3_______100nF 63V Polyester Capacitor
  • C4_______100µF 25V Electrolytic Capacitor
  • D1-D3___1N4148 75V 150mA Diodes
  • IC1_____4093 Quad 2 input Schmitt NAND Gate IC
  • Q1______BC337 45V 800mA NPN Transistor
  • P1______SPST Pushbutton
  • SW1_____DPDT Switch
  • SPKR____8 Ohm Loudspeaker
  • B1______6V Battery (4 AA 1.5V Cells in series)

Circuit operation:

This circuit is intended for children fun, and can be installed on bicycles, battery powered cars and motorcycles, but also on models and various games and toys. With SW1 positioned as shown in the circuit diagram, the typical dual-tone sound of Police or Fire-brigade cars is generated, by the oscillation of IC1A and IC1B gates. With SW1 set to the other position, the old siren sound increasing in frequency and then slowly decreasing is reproduced, by pushing on P1 that starts oscillation in IC1C and IC1D. The loudspeaker, driven by Q1, should be of reasonable dimensions and well encased, in order to obtain a more realistic and louder output. Tone and period of the sound oscillations can be varied by changing the values of C1, C2, C5, C6 and/or associated resistors. No power switch is required: leave SW1 in the low position (old-type siren) and the circuit consumption will be negligible.

If you like this page, please consider sharing

Credits

Source