24 Second Shot Clock

Posted in Timer, on 2015-05-14

Description:

This is a circuit intended to be used in basketball shot clock.

24 Second Shot Clock

Notes:

To start in 24 seconds; 24s LOAD SW and Reset SW should be push simultaneously. If not, the count will start in 99. Pulse input can be connected to 555 astable multivibrator but must be calibrated for real time clock. The PAUSE SW must have a Switch Debouncer so that the counter will count normal when counting is paused and then turn-on.

When the count reach 00, the NOR gate will have an output of logic1 that will turn on the two transistor. The buzzer will rung and light will turn on. The two transistors are continuously turn-on not until LOAD SW and Reset SW is push. All have a +5v power supply. 

If you like this page, please consider sharing

Credits

Source , Author: Milardo de Guzman